Most aquarium advice assumes you can pour water straight from the tap and keep any fish you like. In Europe that is not true. Tap water ranges from almost mineral-free in Norway and Iceland to very hard in London, Brussels and much of Italy, and that difference decides which fish will thrive in your tank with the least effort. This guide shows what to expect in each country and how to work with the water you have.
The short version: look up your water supplier’s hardness figure, convert it to °dH, then choose fish that suit it. Matching fish to your tap water is cheaper, safer and more stable than trying to change the water. Only treat the water if you want a species that needs something very different.
Why hardness matters to your fish
Hardness describes how much dissolved calcium and magnesium the water carries. Aquarists usually talk about two related measurements: GH (general hardness, the calcium and magnesium) and KH (carbonate hardness, which buffers pH and keeps it from swinging). Fish evolved in waters with very different mineral content. Wild discus and many tetras come from soft, mineral-poor rivers, while livebearers and rift lake cichlids come from hard, mineral-rich waters. Our water parameters guide explains GH, KH and pH in more detail.
Converting between hardness units
Water suppliers across Europe report hardness in different units, so the first job is converting to one you can compare. Aquarists in Germany, the Netherlands and much of Central Europe use °dH (German degrees of hardness).
| Unit | Where you will see it | Equal to 1 °dH |
|---|---|---|
| °dH (German degree) | Germany, Netherlands, Austria, aquarium shops | 1 |
| mg/L CaCO₃ (ppm) | Many supplier reports, test kits | about 17.8 |
| mmol/L | Many European supplier reports | about 0.178 |
| °fH (French degree) | France, Belgium, Spain | about 1.78 |
| °eH (Clark degree) | United Kingdom | about 1.25 |
To go the other way, divide: 10 °dH is roughly 178 mg/L CaCO₃, or 1.8 mmol/L. As a rough guide, up to about 8 °dH counts as soft, 8 to 15 °dH as medium and above 15 °dH as hard. Or skip the arithmetic and use our water hardness converter.
Tap water hardness across Europe
The table below gives typical values drawn from published country summaries. Treat it as a starting point only. Hardness changes from one supply area to the next, and sometimes from one season to the next, so your own supplier’s figure always beats a national average.
| Country or region | Typical tap water | Rough hardness |
|---|---|---|
| Norway, Iceland, Finland | Very soft | Mostly under 3 °dH |
| Sweden | Soft to moderate | Varies by area |
| Ireland | Generally soft to moderate | Varies by area |
| Netherlands | Moderate | Varies by supplier |
| United Kingdom | Soft in the north and west, very hard in London and the South East | London and South East about 14 to 20 °dH |
| Germany | Soft in the north, harder elsewhere | Northern regions under about 5.5 °dH |
| Belgium | Hard in Brussels and Wallonia, softer in parts of Flanders | Brussels and Wallonia about 14 to 20 °dH; parts of Flanders about 6 to 11 °dH |
| France | Generally hard | Varies by area |
| Switzerland | Hard in limestone regions | About 14 to 20 °dH there |
| Austria, Czechia, Poland | Moderate to moderately hard | Varies by area |
| Denmark | Hard | Varies by area |
| Italy | Hard to very hard in most cities | Varies by area |
| Spain | Varies widely; Madrid is soft | Madrid about 2 to 6 °dH |
Hardness is only half the picture. Some suppliers disinfect with chlorine or chloramine and others add little or none, and local pipes and treatment change pH and metal content. Always ask your supplier or read its water quality report rather than assuming.
How to find your own numbers
- Check your water supplier’s website. Most European suppliers publish hardness by postcode or supply area, often in °dH, °fH or mmol/L. This is the most reliable source.
- Use a regional map as a cross-check. Wassertipps covers many European countries, though supply areas rarely follow postcode boundaries, so treat it as a guide.
- Test it yourself. A liquid GH and KH test kit costs little and tells you what is actually coming out of your tap. Test the tap water as well as the tank.
If you use a drinking-water filter or a water softener at home, test the water after it, since softened water is unsuitable for most fish. Let the tap run for a minute before collecting water, because water that has stood in metal pipes can carry traces of copper that are harmful to fish and invertebrates.
Which fish suit which water
| Your tap water | Fish that usually thrive |
|---|---|
| Soft (under about 8 °dH) | Many tetras, rasboras, Apistogramma dwarf cichlids, discus, pencilfish, most Otocinclus and many Corydoras |
| Medium (about 8 to 15 °dH) | The widest choice: most community fish, including harlequin rasboras, cherry barbs, most tetras and Corydoras, and gouramis |
| Hard (above about 15 °dH) | Livebearers such as guppies, platies, mollies and swordtails, many barbs, and Lake Malawi and Lake Tanganyika cichlids |
Captive-bred fish are usually far more adaptable than their wild ancestors, so many species listed under one group will do well in the next. A stable tank at slightly the wrong hardness is usually healthier than a tank that is constantly being adjusted. Our harlequin rasbora profile is a good example of an adaptable species that suits a wide range of European tap water.
If your water and your dream fish do not match
You have three options, in order of effort:
- Choose different fish. The easiest and cheapest fix is to pick species that suit your tap water.
- Dilute hard water with soft water. Mixing tap water with reverse osmosis (RO) or other very soft water lowers hardness. To find the share of soft water you need, take the tap water hardness minus the target, divide by the tap water hardness, and multiply by 100. For example, tap water at 16 °dH diluted to 8 °dH needs about half soft water and half tap water.
- Add minerals to very soft water. If your tap water is very soft and you keep fish that want more minerals, use a remineralising product designed for aquariums, following the label.
Avoid “pH up” and “pH down” chemicals in the tank itself. Chasing a pH number with chemicals tends to cause swings that stress fish far more than a steady, slightly different value. If you use RO water, always mix it with tap water or a remineraliser, because pure RO water has no buffer and its pH can crash. Our RO water mixing calculator works out the exact blend for your target hardness.
Frequently asked questions
Is hard water bad for aquarium fish?
No. It is only a problem for species that evolved in very soft water. Many fish do well in hard water, and most captive-bred community fish adapt to a wide range.
Can I use bottled water?
It is not recommended as a routine. Mineral content varies greatly between brands, and it is expensive. Dilute your tap water with RO water, or choose fish that suit your tap water, instead.
Do I need a water conditioner if my supplier does not use chlorine?
Check with your supplier. If it adds no chlorine or chloramine you may not need to remove it, but a conditioner is cheap insurance, since treatment can change. See our guide to water changes for how to change water safely.
My tap water changes with the seasons. What should I do?
Test it a few times a year and keep your water changes moderate so the tank has time to adjust. Large changes with water of very different hardness are the real risk.
Where to go next
Once you know your water, plan your first tank with our setup guide and choose fish that suit it from our fish profiles.
Sources
- Tap Water Guide: water hardness by country
- Wassertipps: water hardness and nitrate levels in Germany and Europe
- Tap Water Guide: water hardness scale and conversions
Values in the country table come from third-party summaries and are approximate. Always confirm hardness with your own water supplier.


Leave a Reply