Free Aquarium Starter Pack

Two printable tools to keep your first tropical aquarium on track: a fishless cycling checklist and a weekly water-change log. Print this page, or keep it open on your phone next to the tank. Both work in litres and degrees Celsius.

1. Fishless cycling checklist

Tick each step as you go. Full explanation in our first aquarium setup guide.

  • Tank placed on a level, sturdy stand, away from direct sun and radiators
  • Substrate rinsed and added; hardscape and plants in place
  • Tank filled with tap water and water conditioner added (dose for the full volume)
  • Filter running and heater set to about 25 °C; thermometer confirms the temperature
  • Light on a timer, about 6 to 8 hours a day
  • Ammonia added to about 2 mg/L (ppm); first test recorded
  • Testing every few days: ammonia falling, nitrite rising
  • Nitrite falling, nitrate appearing
  • Ammonia and nitrite both at zero within 24 hours of dosing, with nitrate present: the tank is cycled
  • Large water change (half or more) to lower nitrate before adding fish
  • First small group of fish added; light dimmed and fish acclimated slowly
  • Water tested again after a week before adding more fish

2. Cycling test log

DateAmmonia (mg/L)Nitrite (mg/L)Nitrate (mg/L)Notes

3. Weekly water-change log

Aim for roughly 20 to 30 percent weekly in a typical community tank, and let your nitrate test adjust it. See how often to change aquarium water for the reasoning.

DateLitres changedConditioner addedTemperature (°C)Nitrate before (mg/L)Filter rinsed?

Get new guides by email

One email when we publish something new, with tap-water tips, fish profiles and honest equipment reviews for European aquarists. No spam, and you can unsubscribe at any time.

Not sure where to start? Read how hard your tap water is and which fish it suits.