If your tap water is harder than your fish like, you can dilute it with reverse osmosis (RO) or other very soft water. Enter your tap water hardness, your target and the amount of water you need and this calculator tells you how much of each to mix.
How it works
The share of RO water is the drop in hardness you want (tap minus target) divided by the difference between your tap water and your RO water. With tap water at 16 °dH, RO water at 0 °dH and a target of 8 °dH, you need half RO water and half tap water.
RO water from a home unit is usually close to 0 °dH, but check yours with a GH test. If you only know your hardness in another unit, convert it with the water hardness converter, and see our guide to tap water hardness in Europe to decide whether you need to dilute at all. Matching your fish to your tap water is usually easier than changing the water.
