A heater is one of the few pieces of equipment a tropical tank cannot do without in most European homes. This buying guide explains what matters, without recommending specific products. We do not yet review individual models, and we will say so clearly when we do.
The short answer: pick the wattage with our heater calculator, choose an adjustable thermostat model with a protective guard, and always check the temperature with a separate thermometer.
1. Get the wattage right
A common rule of thumb is about 1 watt per 10 litres for every degree you need to raise the water above room temperature, which is what our calculator uses, rounded up to a standard heater size. It is a rule of thumb, not a standard, so allow extra margin for cold rooms.
2. Features worth paying for
- Adjustable thermostat with a clear scale, so you can match each species.
- Protective guard to stop fish touching the glass or element.
- Safety cut-off against overheating, and a CE mark for sale in the EU.
- Shatter-resistant material where possible.
3. Consider two smaller heaters
In larger tanks, two heaters of half the wattage spread the heat and mean that one failure will not leave the tank cold or boiling. This is common aquarist practice.
4. Use a thermometer
Built-in dials drift. A cheap separate thermometer, ideally on the far side of the tank, is the best insurance. Temperatures should suit the species: for example bettas need 24 to 30 °C while zebra danios are recorded at 18 to 24 °C.
Frequently asked questions
Can I leave the heater on all the time?
Yes, a thermostat switches it on and off as needed. Unplug it before water changes and make sure it is covered by water when running.
Sources
- FishBase: Betta splendens and Danio rerio: species temperature ranges used as examples.
The wattage rule, safety features and two-heater advice are common aquarist practice, not drawn from a published standard. See all our sources.


Leave a Reply